Free shippingOn every online order shipped within the contiguous U.S. Valid only for orders placed through our website.
Safety Through Innovation · Made in the USA
Free shippingOn every online order shipped within the contiguous U.S. Valid only for orders placed through our website.
Drill press guards for bench, floor and production drill presses: interlocked flip-up and side-swing guards, telescoping spindle guards, fully enclosed spindle guards and anti-restart controls that keep the spindle from restarting by itself.
Showing all 8 products
The rotating spindle, chuck and bit on a drill press catch gloves, sleeves and hair in an instant, and a workpiece that is not clamped can spin with the bit. Chips fly from the cut, and many older drill presses restart by themselves when power returns after an outage. OSHA 29 CFR 1910.212 requires guarding of rotating parts, and ANSI B11.8 covers safeguarding of drilling, milling and boring machines.
The interlocked flip-up drill press guard puts a clear Lexan polycarbonate panel between the operator and the chuck, tooling and flying chips, and the flip-up or side-swinging drill press guard is available with the optional Odiz interlock system, so the spindle cannot run while the shield is open.
The Flexbar DrillGuard telescoping drill press guard extends and retracts with the spindle and is available with an LED light.
For production drilling, the interlocked front or fully enclosed spindle drill press guard guards the spindle from the front or on every side.
A drill press guard is only part of the fix if the machine restarts by itself after a power loss. No GoT power loss drop-out controls and the anti-restart interlocked drill press Lexan guard require a deliberate restart after any interruption.
Gang drills, multi-spindle heads and special-purpose drills often need a custom drill press guard. For large radial drills, see radial arm drill press guards, and for a plant-wide plan, book a machine guarding risk assessment.
Yes. OSHA 29 CFR 1910.212(a)(1) requires guarding to protect operators from hazards such as rotating parts and flying chips, and unguarded drill press spindles and chucks are a frequent machine guarding citation.
An interlocked guard stops the spindle, or keeps it from starting, when the guard is open, which protects operators who reach in to change bits or clear chips. A risk assessment decides whether an interlock is required for your machine and task.
Anti-restart, or no-voltage release, keeps a machine from starting by itself when power returns after an outage or a tripped breaker. The operator has to press start again, so the spindle cannot surprise someone working at the chuck.
Yes. Odiz builds custom drill press guards for gang drills, multi-spindle heads and special machines, sized to the spindles and the parts you run.