OSHA 1910.23
Ladders
OSHA’s general industry requirements for portable and fixed ladders, including rung spacing and clear width, inspection, tagging defective ladders and safe climbing. It applies to all ladders except those used in…
Safety Through Innovation · Made in the USA
Find Odiz machine guarding and safety products by the OSHA regulation or ANSI/ISO standard they relate to. Each standard lists the products tagged with it.
Federal workplace safety regulations from 29 CFR 1910 (general industry) and 1926 (construction).
OSHA 1910.23
OSHA’s general industry requirements for portable and fixed ladders, including rung spacing and clear width, inspection, tagging defective ladders and safe climbing. It applies to all ladders except those used in…
OSHA 1910.137
OSHA’s design, inspection and testing requirements for rubber insulating equipment, including gloves, sleeves, blankets, matting, covers and line hose, and for the in-service care and periodic electrical retesting of…
OSHA 1910.140
OSHA’s general industry criteria for personal fall protection systems, covering connectors, lanyards, lifelines, self-retracting devices and anchorages, the performance of personal fall arrest, travel restraint and…
OSHA 1910.147
OSHA’s general industry rule for controlling hazardous energy. It requires an energy control program with written procedures, lockout or tagout devices, employee training and periodic inspections so machines are…
OSHA 1910.212
OSHA 1910.212 sets the general requirements for machine guarding, covering moving parts, points of operation, in-running nip points, and flying debris. It applies to all machines to protect workers from injury caused…
OSHA 1910.213
OSHA 1910.213 outlines safety requirements for woodworking machinery, covering design, construction, operation, and guarding. It ensures saws, planers, jointers, sanders, and other woodworking machines are equipped…
OSHA 1910.215
OSHA 1910.215 sets forth comprehensive safety requirements for abrasive wheel machinery, including grinders, buffers, and cutoff machines. It mandates proper wheel guarding, tool rest adjustment, ring testing, and…
OSHA 1910.217
OSHA’s safety requirements for mechanical power presses, covering press construction and brakes, point-of-operation guards and safeguarding devices, safety distances, inspection and maintenance, operator training and…
OSHA 1910.219
OSHA’s guarding requirements for mechanical power-transmission apparatus, including prime movers, flywheels, shafting, pulleys, belts, chains, gears and sprockets, plus guard materials and the inspection and…
OSHA 1910.335
OSHA’s general industry requirements for protecting employees from electrical hazards with personal protective equipment, insulated tools, protective shields and barriers, and alerting techniques such as safety signs…
OSHA 1926.304
OSHA 1926.304 covers safety requirements for woodworking tools, including portable saws, abrasive wheels, guarding, and safe operating practices in construction. It is a key standard for preventing lacerations…
OSHA 1926.502
OSHA’s construction criteria for fall protection systems, including guardrails, safety nets, personal fall arrest systems, positioning devices, warning lines, controlled access zones, safety monitoring and covers…
OSHA 1926.1053
OSHA’s construction industry requirements for portable, fixed and job-made ladders, covering load capacity, rung spacing, setup angle, side-rail extension, nonconductive side rails near energized equipment, inspection…
Consensus standards for machine safety, fall protection and ladders. Each page summarizes the standard’s scope; the full standards are published by their standards organizations.
ANSI A10.8
ANSI/ASSP A10.8 sets safety requirements for the construction, erection, use, inspection and dismantling of scaffolds used in construction, demolition and maintenance work, including supported and suspended scaffolds…
ANSI A14
The ANSI A14 standards set construction, testing, marking and use requirements for ladders, including wood (A14.1), portable metal (A14.2), fixed (A14.3), job-made (A14.4) and portable reinforced plastic or fiberglass…
ANSI B7.1
ANSI B7.1 sets safety rules for abrasive wheels, covering handling, mounting, flanges, guards, and operating speeds. OSHA 1910.215 relies on this standard for design detail and compliance guidance.
ANSI B11
ANSI B11 is a suite of machine safety standards governing the design, guarding, risk assessment, and safeguarding of industrial machinery. It supports detailed safety criteria for compliance with OSHA’s machine…
ISO 13849-1
ISO 13849-1 (2015) provides guidance for the design and integration of safety-related parts of control systems (SRP/CS) on machinery, including performance levels (PLs), architectural categories, diagnostics, and…
ISO 13849-2
ISO 13849-2:2012 provides the procedures and conditions for validating safety-related parts of control systems (SRP/CS) on machinery—ensuring safety functions meet design specs, category targets and performance levels…
ANSI R15.06
R15.06 sets safety requirements for industrial robots and robot systems, covering robot manufacture, system integration, risk assessment, safeguarding, control-systems and life-cycle responsibilities.
ANSI Z136.1
Z136.1 provides consensus guidance for the safe use of lasers and laser systems—including defining hazard classifications, control measures, exposure limits and administrative responsibilities in industrial, research…
ANSI Z136.4
Z136.4 provides a recommended practice for measuring laser output and evaluating exposure hazards, supporting safe use of lasers according to classification and control protocols.
ANSI Z136.9
Z136.9 provides guidance on the safe use of lasers in manufacturing environments, covering wavelength bands from 180 nm to 1 mm and addressing hazard classification, control measures, training, and non-beam risks.
ANSI Z244.1
ANSI Z244.1 defines industry-consensus requirements for the control of hazardous energy during machine servicing and maintenance, including lockout, tagout, and alternative methods when traditional LOTO is not feasible.
ANSI Z359
The ANSI/ASSP Z359 Fall Protection Code is a family of consensus standards for managed fall protection programs and for the design, testing and use of harnesses, lanyards, connectors, self-retracting devices…