Safety Through Innovation · Made in the USA
OSHA 1910.212(a)(3)(iv)(i) lists forming rolls and calenders as machines that usually require point-of-operation guarding. These rotating equipment types create severe in-running nip points that can pull in clothing, hair, or body parts, requiring fixed or adjustable guards and emergency stops.
4 products
OSHA 29 CFR 1910.212(a)(3)(iv)(i) identifies forming rolls and calenders as machines that usually require point-of-operation guarding.
These machines shape, flatten, or finish materials such as metal, rubber, or plastic by passing them through a series of rotating cylinders or rollers.
The close spacing of the rolls creates in-running nip points capable of drawing in fingers, hands, or clothing with tremendous force.
Guarding is required to prevent any part of the body from entering these danger zones during operation.
Forming rolls and calenders are among the most hazardous types of rotating machinery due to their powerful in-running nip points.
OSHA 1910.212(a)(3)(iv)(i) ensures these machines are equipped with fixed guards, trip devices, and accessible emergency stops to prevent entanglement, crushing, and burn injuries.
Adhering to this standard is critical for compliance and for protecting employees in metalworking, rubber processing, and plastics manufacturing operations.
An in-running nip point is the area where two rotating surfaces move toward each other, pulling in anything that comes between them—such as hands, clothing, or material.
Yes. Guarding is mandatory regardless of operator skill level. Training complements engineering controls but does not replace them.
Trip devices should be tested daily before each shift and after any maintenance or adjustment to ensure immediate stop function.
Showing all 4 products