Safety Through Innovation · Made in the USA
OSHA 1910.213(p)(1) requires self-feed sanding machines to have semicylindrical guards over feed rolls to prevent hand contact with in-running nip points. Guards must be made of heavy, preferably metal material, securely fixed, and positioned within three-eighths inch of the feed roll’s contact plane.
1 products
OSHA 29 CFR 1910.213(p)(1) sets strict safety requirements for self-feed sanding machines—machines that automatically feed stock through sanding rolls or belts.
This standard specifically addresses the feed rolls, requiring a semicylindrical guard to prevent an operator’s hands from coming into contact with the in-running nip points, where the stock enters the machine.
The regulation ensures consistent protection regardless of stock thickness or operator position.
“Feed rolls of self-feed sanding machines shall be protected with a semicylindrical guard to prevent the hands of the operator from coming in contact with the in-running rolls at any point. The guard shall be constructed of heavy material, preferably metal, and firmly secured to the frame carrying the rolls so as to remain in adjustment for any thickness of stock. The bottom of the guard should come down to within three-eighths inch of a plane formed by the bottom or contact face of the feed roll where it touches the stock.”
Self-feed sanding machines use powered feed rolls to pull material into contact with abrasive drums or belts.
The in-running nip point between these rolls is a major hazard zone that can draw in hands, fingers, or clothing in less than a second.
OSHA 1910.213(p)(1) requires a semicylindrical guard—curved to follow the contour of the feed rolls—to block operator access while allowing smooth material feed.
The rule’s precision clearance requirement ensures maximum protection without interference in production.
OSHA 1910.213(p)(1) directly addresses one of the most hazardous components of self-feed sanding machines—the in-running feed rolls.
These rolls exert continuous pulling force capable of trapping and crushing hands in an instant.
By mandating a semicylindrical, heavy-duty guard positioned within 3/8 inch of the feed roll’s contact plane, the regulation prevents physical access to this high-risk area while allowing efficient stock feeding.
Compliance with this rule significantly reduces amputations, entanglements, and crush injuries in sanding machine operations.
The semicylindrical shape matches the feed roll contour, ensuring full coverage and minimal clearance to block access from all directions.
While metal is preferred, any material used must provide equivalent strength, rigidity, and resistance to wear and impact.
The guard must be designed to remain properly positioned regardless of stock thickness, either through fixed mounting or automatic adjustment.