Free shippingOn every online order shipped within the contiguous U.S. Valid only for orders placed through our website.
Safety Through Innovation · Made in the USA
Free shippingOn every online order shipped within the contiguous U.S. Valid only for orders placed through our website.
Vertical mill guarding, including anti-restart interlocked Lexan guards, chip and coolant shields and custom mill guards.
Showing all 4 products
On a vertical mill the cutter turns in the open at the front of the head, right where the operator loads parts, clears chips and checks dimensions. Above the head, the drawbar turns with the spindle and can catch hair or a sleeve. The same machine also drills and bores, so the tool travels up and down with the quill while the table moves the part beneath it. Chips and coolant leave the table in every direction, and a mill whose switch is left on can start again by itself when power returns after an outage.
Effective vertical mill guarding covers the cutter on the operator’s side, keeps the cut in view and moves clear for tool changes, while an interlock or restart control handles the moments when it is open.
For restart protection on other machines, see anti-restart and motor brake systems; for machining centers, see CNC milling; and for Bridgeport-style mills, see toolroom mill guards.
OSHA 1910.212(a)(3)(iv)(e) lists milling machines among machines that usually require point of operation guarding, and 1910.212(a)(1) covers rotating parts, such as the drawbar, along with flying chips. Manually controlled vertical mills fall under ANSI B11.8, which allows some automatic capability but not automatic tool changing or part handling. Machining centers and CNC mills that run automatic production belong to ANSI B11.23, while ANSI B11.0 sets out the risk assessment used to choose between shields, guards and interlocks.
The drawbar turns with the spindle on top of the head, and OSHA 1910.212(a)(1) requires guarding against hazards created by rotating parts. A drawbar cover keeps hair, sleeves and rags away from it, and Odiz custom milling machine guards include drawbar guarding.
It combines a clear Lexan shield with an interlock and anti-restart protection. The interlock keeps the spindle from running while the shield is open, and the anti-restart function holds the mill off after a power interruption until the operator presses start.
It depends on how the mill is used. ANSI B11.8 covers manually controlled mills with or without automatic control, as long as they have no automatic tool changer or part handling. It excludes numerically controlled mills where manual control is used only to set up automatic production; ANSI B11.23 addresses those, within the size limits set in its scope.