Free shippingOn every online order shipped within the contiguous U.S. Valid only for orders placed through our website.
Safety Through Innovation · Made in the USA
Free shippingOn every online order shipped within the contiguous U.S. Valid only for orders placed through our website.
Machine safety tools and gauges: No Go™ grinder gauges and adjustment kits, a hands-free lathe polishing tool, die blocks and the Gotcha Stick.
Showing all 6 products
Guards protect people while a machine runs, but some routine jobs still bring hands close to a hazard: resetting grinder work rests as the wheel wears, polishing a part on a lathe, working between the dies of a press and confirming that a new guard keeps fingers out. Machine safety tools and gauges make those jobs quicker to do correctly and keep hands out of the danger zone. They support guarding rather than replace it, and OSHA 1910.212(a)(3)(ii) still requires the point of operation of any machine that exposes an employee to injury to be guarded.
Grinder safety tools and gauges include the patented No Go™ bench grinder safety gauge in a wire-tethered version and a magnet version, plus the ODIZ bench grinder adjustment safety kit of magnetic tools for wheel changes. The gauges check the two gaps that OSHA 1910.215 limits on bench grinders: the work rest opening and the tongue guard gap.
Polishing a turning part with abrasive cloth held by hand puts fingers, gloves and sleeves within reach of the chuck and workpiece. The hands-free lathe polishing tool in lathe safety tools is lathe-mounted, so the abrasive is held against the work by the tool instead of the operator’s hand.
Press safety tools cover custom fixed height die blocks, engineered for your press tonnage, and the Machine Guarding Gotcha Stick, a gauge for checking whether guard openings keep hands and fingers away from the hazard. OSHA 1910.217 requires safety blocks whenever dies are adjusted or repaired in a mechanical power press, and ANSI B11.1 sets safety requirements for the construction, care and use of those presses.
Use these tools alongside guards and controls: machine guarding, press safety controls, anti-restart and motor brake systems, and grinder pedestals in grinding and finishing stands. The ANSI B11 series covers safeguarding for specific machine types, and a machine risk assessment shows where each tool fits.
No. Gauges, die blocks and hands-free tools make setup, adjustment and inspection safer, but OSHA 1910.212(a)(3)(ii) still requires the point of operation to be guarded so no part of the operator's body is in the danger zone during the operating cycle. Use these tools together with guards, interlocks and your lockout procedure.
Hand-held abrasive pressed against a turning part brings fingers, gloves and clothing within reach of rotating parts, where they can be caught and pulled in. The hands-free lathe polishing tool is lathe-mounted and holds the abrasive against the work in place of the operator's hand.
Start with a machine risk assessment or job hazard analysis that lists each setup, adjustment and inspection task and where hands come near a hazard. Grinders call for gap gauges and wheel changing tools, presses for die blocks and guard opening checks, and lathes used for hand polishing for a hands-free polishing tool.
It is listed for presses, press brakes, iron workers, shears, rollers and pipe benders, and it suits any guard where hands could reach a hazard through an opening. If the gauge can touch the equipment through a gap, the opening is too large and the guard needs to be corrected.