Free shippingOn every online order shipped within the contiguous U.S. Valid only for orders placed through our website.
Safety Through Innovation · Made in the USA
Free shippingOn every online order shipped within the contiguous U.S. Valid only for orders placed through our website.
Remote camera systems and machine line process cameras with intercoms for monitoring hazardous machining tasks.
Showing all 2 products
Machinists often lean into a machine or open a guard just to see what is happening, whether a tool is touching off, a setup is being checked or a finish is being verified. Long production lines and blind spots create the same urge for operators who need to see the far end. Safety monitoring and vision systems put a camera where the operator’s head and hands would otherwise go, so the task can be watched from outside the point of operation.
A camera cannot stop a machine, so it never replaces guards, interlocks or presence-sensing devices. OSHA 1910.212(a)(3)(ii) still requires the point of operation to be guarded, and ANSI B11.0 covers the risk assessment used to choose each safeguard. When someone must enter the machine for servicing or to clear a jam, follow the energy control procedure; ANSI Z244.1 covers lockout, tagout and alternative methods for controlling hazardous energy. Pair cameras with machine interlock systems, machine enclosures and machine lighting.
No. A camera lets an operator watch a task from a safe position, but it cannot stop the machine or keep hands out of the danger zone. Use cameras alongside guards, interlocks and presence-sensing devices so operators have less reason to open or reach past them.
Any task where an operator would otherwise lean in or open a guard to see, such as checking a setup, watching a tool touch off, verifying a finish or monitoring a station at the far end of a continuous flow line.
On long lines, operators at different stations need to coordinate starts, stops and jam clearing. An intercom lets them talk without leaving their stations or walking into the line, while the cameras show what is happening at each point.
Yes. Odiz designs machine line process camera and intercom systems for each continuous flow line. To scope one, share the line layout, the stations and tasks to monitor, where operators stand and how they communicate today during starts, stops and jams.