Free shippingOn every online order shipped within the contiguous U.S. Valid only for orders placed through our website.
Safety Through Innovation · Made in the USA
Free shippingOn every online order shipped within the contiguous U.S. Valid only for orders placed through our website.
CNC waterjet guards that keep people clear of the cutting head and the moving gantry: pressure-sensitive push body bars, perimeter barrier guards, splash protection and emergency stops for high-pressure waterjet cutting tables.
A waterjet cuts with water pressurized to tens of thousands of psi, often mixed with abrasive. A jet at that pressure can cut skin and cause serious injection injuries, and the cutting head rides on a gantry that can strike or pin people at the table edge. Splash, abrasive, noise and wet floors add to the risk.
Guarding is one layer. Locking out the high-pressure pump under OSHA 29 CFR 1910.147 before maintenance, relieving line pressure before opening fittings and training operators on injection injuries complete the program. A machine guarding risk assessment reviews the whole cell, from loading to pump maintenance. See also CNC plasma table guards and CNC router guards.
A high-pressure jet can penetrate skin and inject water and abrasive into tissue. The entry wound can look minor while the damage underneath is severe, so any waterjet injection injury needs immediate medical care.
Most waterjets need protection from the moving gantry and cutting head on every side people can reach, usually push bars or presence sensing on the loading side, fixed barriers elsewhere and emergency stops.
Yes. Under OSHA 29 CFR 1910.147, isolate and lock out the pump and relieve stored pressure before servicing the cutting head, valves or lines.