Free shippingOn every online order shipped within the contiguous U.S. Valid only for orders placed through our website.
Safety Through Innovation · Made in the USA
Free shippingOn every online order shipped within the contiguous U.S. Valid only for orders placed through our website.
Stands for bench grinders and finishing equipment, including the No Go™ Grinder Safety Stand, low-cost pedestal stands and custom stands.
Showing all 4 products
A bench grinder needs clear space around both wheels and a height at which the operator can hold work steady on the rest. A dedicated pedestal stand gives the grinder that space away from a crowded workbench, and its base plate bolts to the floor. OSHA 1910.212(b) requires fixed-location machines to be securely anchored, and OSHA’s grinder checklist applies that to bench and pedestal grinders by asking whether they are permanently mounted.
The low cost bench grinder pedestal stand is steel, powder coated low gloss black, with a 12 x 12 x 1/4 in. base, 1/2 in. anchor holes in the corners and a blank 12 x 12 in. top plate that you drill to suit. It stands 33-1/2 in. tall plus the grinder and fits most 6 to 10 in. bench grinders. For heavier equipment, a pre-drilled top or gusset bracing, start with build your own custom stand.
The No Go™ Grinder Safety Stand adds sensors at the work rests, so the grinder will not start when a rest is out of adjustment. Options cover new or used bench grinders and 120 V or 208-230/460 V supplies. The MAKESafe Tools stand is a turnkey system: a bench grinder with guards, an industrial tool pedestal and the MAKESafe Power Tool Brake, integrated and ready to run.
Grinders are in bench grinders, and water pots, tool rests and replacement work rests and tongue guards for the No Go stand are in grinding and finishing parts. For dust at the wheel, see grinding and finishing dust collection, and for other pedestals, see machine stands and workstations.
It suits most 6 to 10 in. bench grinders. The 12 x 12 in. top plate is left blank so you can drill it for your grinder's mounting holes, and the stand is 33-1/2 in. tall before the grinder is added. The top can also carry a water pot, which is sold separately.
A plain pedestal supports and anchors the grinder. The No Go stand adds sensors at the work rests, so the grinder will not start when a rest is set outside its allowed gap. Replacement work rests and tongue guards for the stand, with tapped holes for the sensors, are listed in grinding and finishing parts.
It is a turnkey system: a bench grinder fitted with guards, an industrial tool pedestal and the MAKESafe Power Tool Brake, integrated and installed so the grinder, guards, pedestal and brake come as one ready-to-go package.
Yes. Under OSHA 1910.212(b), a machine built for a fixed location has to be anchored so it cannot walk or move, and OSHA's grinder checklist asks whether bench and pedestal grinders are permanently mounted. Odiz grinder pedestals have base plates drilled for floor anchors.