Free shippingOn every online order shipped within the contiguous U.S. Valid only for orders placed through our website.
Safety Through Innovation · Made in the USA
Free shippingOn every online order shipped within the contiguous U.S. Valid only for orders placed through our website.
Vertical band saw guards for metal and wood cutting saws: an adjustable blade guard for saws with 15-inch and larger wheels, magnetic and polycarbonate shields, and power loss drop-out controls.
Showing all 4 products
On a vertical band saw, the operator pushes work toward the blade by hand, so the most important guard is the one over the blade between the upper guide and the workpiece. Lower that guide to just above the stock for every cut, enclose the blade above the guide and below the table, and keep the wheel covers closed. OSHA 29 CFR 1910.213(i) sets these requirements for woodworking band saws, and ANSI B11.10 covers metal sawing machines.
Use push sticks or jigs for small parts so fingers stay out of the blade line, and stop the saw before clearing scrap. Cutting long stock on a horizontal saw instead? See horizontal band saw guards or all bandsaw guards.
Lower the upper blade guide and its guard to just above the top of the workpiece before each cut, so only the blade needed for the cut is exposed.
Blade guards are usually steel or aluminum, and many add a clear polycarbonate panel so the operator can see the blade and cut line. The Odiz vertical bandsaw guard uses aluminum T-slot framing with a Lexan panel.
It is designed for vertical band saws with 15-inch and larger wheels. For other saws, Odiz can build a custom guard.