Free shippingOn every online order shipped within the contiguous U.S. Valid only for orders placed through our website.
Safety Through Innovation · Made in the USA
Free shippingOn every online order shipped within the contiguous U.S. Valid only for orders placed through our website.
Risk assessment apps for machine guarding (MGRA), job hazard analysis (JHA), and ANSI/ISO and PUWER hazard risk assessments.
Showing all 4 products
The four apps cover different depths of hazard analysis, from a guided walk-around to a scored risk assessment.
The MGRA, ANSI/ISO and PUWER apps look at a machine or piece of work equipment. A JHA looks at the job a person performs, which may involve several machines, tools and locations. The two approaches complement each other: a machine assessment informs the choice of safeguards, and a JHA plans non-routine work such as maintenance and setup, when people may need to be inside guarded areas.
ANSI B11.0 describes the machinery risk assessment process: identify hazards, then estimate, evaluate and reduce risk, and document the result. It now contains the guidance once published as the B11.TR3 technical report. ISO 12100 sets out the same general principles of risk assessment and risk reduction for machine design. Once risk reduction measures are chosen, ANSI B11.19 sets their performance requirements. PUWER, the Provision and Use of Work Equipment Regulations that apply in Great Britain, requires work equipment to be suitable for its intended use, maintained in a safe condition, inspected where needed and fitted with suitable safety measures such as guarding and emergency stops.
Findings that call for guarding lead to the machine guarding and electronic safety enclosures ranges. For an on-site review by Odiz, see machine risk assessments, and to follow which assessments are complete or due, see training and analytics.
The MGRA app is a guided guarding walk-through with questions, notes and photos and no full scoring process. The ANSI/ISO app rates severity, exposure, likelihood and the chance to avoid harm before and after safeguards, which records how much each safeguard is expected to reduce the risk.
Use a JHA when the risk comes from how a task is performed, such as maintenance, setup, confined space entry or hot work. It breaks the job into steps and records the hazards, precautions, PPE and tools for each one.
No. PUWER is a set of regulations that applies in Great Britain. The PUWER app is meant for work equipment used under those regulations, while the ANSI/ISO app rates severity, exposure, likelihood and the chance to avoid harm, before and after safeguards are applied.
Yes. In the MGRA app you walk the machine, answer guarding questions, document concerns and add photos, which gives a visual record of each guarding issue to follow up on later.