Free shippingOn every online order shipped within the contiguous U.S. Valid only for orders placed through our website.
Safety Through Innovation · Made in the USA
Free shippingOn every online order shipped within the contiguous U.S. Valid only for orders placed through our website.
CNC plasma guards that protect operators and passers-by from the moving gantry and torch: pressure-sensitive push body bars that stop the machine on contact, barrier guards, emergency stops and custom guarding for plasma cutting tables.
A CNC plasma table combines several hazards in one open work area: a gantry that travels the length of the table and can strike or pin someone at the edge, the plasma arc and its ultraviolet light, hot slag and sparks, and cutting fumes. The table stays open on several sides for loading sheet, so a CNC plasma guard has to stop hazardous motion when someone enters the gantry’s path without boxing in the table.
The pressure-sensitive push body bar is an emergency-trip device: any contact stops the machine. Fitted along the gantry or the table edge as a custom solution, it works as both a barrier guard and an emergency stop.
Custom barrier guards close off the sides of the table that operators do not load from, and light curtains and presence-sensing devices protect open loading sides.
Place emergency stop controls within reach of every work position, and wire guards so the gantry cannot restart until the zone is clear and reset.
Plasma cutting is also covered by OSHA’s welding and cutting rules in 29 CFR 1910.252 and by ANSI Z49.1, so plan screens or curtains against arc light, fume extraction at the table and fire prevention around the cutting area alongside the machine guarding that OSHA 1910.212 requires.
Every plasma table is different. Odiz can design a custom engineered guard for yours, and a machine guarding risk assessment shows what the table needs. See also CNC router guards and CNC waterjet guards.
Yes. OSHA 29 CFR 1910.212 requires guarding against hazards created by moving machine parts, which includes a traveling gantry. Plasma cutting is also covered by OSHA's welding and cutting rules in 29 CFR 1910.252.
The bar is an emergency-trip device. When a person presses against it, it opens a safety circuit that stops the machine, so it acts as both a barrier and an emergency stop.
Yes. Fixed guards close off the sides you do not load from, while push bars, light curtains or safety mats protect the loading side and stop motion only when someone is in the hazard zone.