Free shippingOn every online order shipped within the contiguous U.S. Valid only for orders placed through our website.
Safety Through Innovation · Made in the USA
Free shippingOn every online order shipped within the contiguous U.S. Valid only for orders placed through our website.
Conveyor guarding for belt, roller and chain conveyors: flat conveyor guard panels that bolt together in one-foot increments, and custom belt and drive guards for nip points, tail pulleys, head pulleys and power transmission.
Showing all 2 products
Conveyor injuries cluster at a few points: in-running nip points where a belt meets a pulley or roller, tail and head pulleys, drive chains and sprockets, transfer points between conveyors, and take-ups. These points can pull in a hand or clothing faster than anyone can react. OSHA 29 CFR 1910.212 requires guarding of nip points and rotating parts, OSHA 29 CFR 1910.219 covers belts, pulleys, chains and sprockets, and ASME B20.1 is the consensus safety standard for conveyors.
Flat conveyor guarding panels close off the sides and underside of a conveyor. They mount in one-foot increments and bolt together, so you can build guards to your conveyor’s dimensions, designed to OSHA requirements for finger safety.
Custom belt guards enclose motors, belts and pulleys, and belt and coupling guards cover the power transmission on conveyor drives.
Long conveyors also need emergency stops within reach along their length, such as pull-cord switches and emergency stop controls.
A guard protects only if no one can reach through, over, under or around it. The farther a guard sits from the hazard, the larger its openings can be, a relationship set out in OSHA Table O-10 and ISO 13857. Size conveyor guard openings to those distances.
Guarding a whole line? A machine guarding risk assessment maps every nip point and drive on your conveyors and prioritizes the fixes. For robotic palletizing and automated lines, see robot cell guarding.
Guard in-running nip points at pulleys and rollers, tail and head pulleys, drive belts, chains and sprockets, shafts and couplings, and transfer points anywhere people can reach them during normal work.
OSHA 29 CFR 1910.212 covers machine guarding in general industry, including nip points, and 29 CFR 1910.219 covers mechanical power transmission such as belts, pulleys, chains and sprockets. ASME B20.1 is the consensus safety standard for conveyors.
It depends on how far the guard sits from the hazard. OSHA Table O-10 and ISO 13857 set the maximum opening for each distance, so the closer a guard is to a nip point, the smaller its openings must be.
Yes, but a fixed guard should need a tool to remove, and the conveyor must be locked out under OSHA 29 CFR 1910.147 before anyone works inside the guarding.