Free shippingOn every online order shipped within the contiguous U.S. Valid only for orders placed through our website.
Safety Through Innovation · Made in the USA
Free shippingOn every online order shipped within the contiguous U.S. Valid only for orders placed through our website.
Iron worker guards for every station on the machine: Piranha ironworker safeguarding kits for the shear, punch and notcher, two-hand control systems, stop and E-stop foot pedal bars, and the Gotcha Stick for checking guard openings.
Showing all 4 products
An ironworker combines several machines in one: a punch, a flat bar shear, an angle shear and a notcher or coper, each with its own point of operation and often in use by different operators. OSHA enforces point-of-operation guarding on ironworkers under 29 CFR 1910.212(a)(3), and ANSI B11.5 sets the safety requirements for iron workers.
The Piranha ironworker safeguarding kit is a general-purpose guarding kit that protects all four sides of the ironworker, including the shear, the punch and the notcher, so operators can feed material without reaching the die or blade.
A two-hand control safety system keeps both hands on the controls during the stroke where the work allows it. Guard the foot pedal against accidental activation, and add a stop and E-stop foot pedal bar so the operator can stop the machine quickly.
The machine guarding Gotcha Stick checks whether a finger could reach the point of operation through a guard opening.
Each ironworker station needs its own guarding plan based on the work it runs. A machine guarding risk assessment reviews every station and the way your operators use it. For presses, press brakes and shears, see metal forming guarding.
OSHA enforces ironworker guarding under the general machine guarding standard, 29 CFR 1910.212, which requires point-of-operation guarding. ANSI B11.5 is the consensus standard for iron workers.
Yes. The punch, the shears and the notcher each have a point of operation, and every station that can be operated needs a guard or device that keeps fingers out of it.
A gauge for checking guard openings. Put it through an opening to see whether a finger could reach the hazard, based on the opening size and distance limits in OSHA Table O-10.