Free shippingOn every online order shipped within the contiguous U.S. Valid only for orders placed through our website.
Safety Through Innovation · Made in the USA
Free shippingOn every online order shipped within the contiguous U.S. Valid only for orders placed through our website.
Palletizer safety, including pressure-sensitive push body bars for barrier guarding and E-stop, and custom belt guards.
Showing all 3 products
End-of-line equipment runs automatically, but people still approach it to clear jams, square up loads, change stretch film and pull finished pallets. A stretch wrapper’s turntable or rotating arm and its rising and falling film carriage can strike or trap anyone inside the wrap zone, palletizer hoists and layer heads create crush points, and drive belts and conveyor infeeds form nip points at the edge of the machine.
Walk the cell and note every place people enter during a shift. Gates used for routine tasks should be interlocked so the wrapper or palletizer stops when they open, while panels around drives can be fixed. Set the fence back far enough from the moving parts that no one can reach over, through or under it into the hazard, and keep forklift lanes clear for pallet removal. For electronic access control, see machine interlock systems and light curtains and presence-sensing devices; for nearby equipment, see conveyor guarding and robot cell and perimeter guarding.
Under OSHA 1910.212(a)(1), palletizers and wrappers need guarding that protects operators and others in the area from hazards such as ingoing nip points and rotating parts, using methods like barrier guards and electronic safety devices. 1910.212(a)(3) adds point of operation guarding where the machine works on the load. ANSI B11.0 sets out the risk assessment for single machines and machinery systems, from a stand-alone wrapper to a full end-of-line cell.
People open the gates during normal work to change film, clear a jam or remove a pallet. An interlocked gate stops the wrapper's motion when it opens, or keeps the machine from starting until it closes, so no one is inside the fence while the turntable or arm is moving. Odiz offers the interlocked gates as an option.
For perimeter guarding around moving equipment, welded-wire fencing keeps people out while letting operators watch the wrap cycle and spot problems from outside. The size of the openings and the fence's distance from the hazard must prevent anyone from reaching through to the motion, so plan both together.
Odiz builds custom belt guards from four measurements. Match each measurement to the dimension options shown in the product image, select the sizes, and the guard is built to those dimensions. For drives that do not fit the standard options, contact Odiz for a custom design.