Free shippingOn every online order shipped within the contiguous U.S. Valid only for orders placed through our website.
Safety Through Innovation · Made in the USA
Free shippingOn every online order shipped within the contiguous U.S. Valid only for orders placed through our website.
Conveyor and belt guards, including flat conveyor guarding and custom belt guards for power transmission components.
Showing all 2 products
A running conveyor creates nip points wherever a belt wraps a head, tail or snub pulley, wherever a chain meets a sprocket and between belts and rollers. Drives and take-ups are often mounted low on the frame, within reach of walkways and work positions, and a long line repeats those exposures along its length. OSHA 1910.212(a)(1) requires guarding that protects operators and other employees in the machine area from ingoing nip points and rotating parts.
Odiz flat conveyor guarding is built from 11-gauge steel and expanded flat steel, powder coated safety yellow to stand out and withstand harsh conditions. Mounting holes are on 1 foot increments, so panels bolt together to cover long runs and odd lengths. The same panels work as general machine guarding wherever a flat barrier is needed, and Odiz custom builds guards and features the standard panels do not cover. Request custom sizes by email or through the virtual design assistant.
Many conveyors are driven through a belt or chain from the motor. A custom belt guard, built from four measurements of the drive, encloses the belt and pulleys. Under OSHA 1910.219, sprocket wheels and chains must be enclosed unless they are more than 7 feet above the floor or platform, and guards must be rigidly braced every 3 feet or fractional part of their height to a fixed part of the machinery or building.
For drive guards on their own, see belt and coupling guards. Automated lines may also need robot cell and perimeter guarding, and conveyor guarding is also listed with guards by machine type under other machines.
Yes. The mounting holes on Odiz flat conveyor guards are on 1 foot increments, so panels bolt together end to end to cover longer conveyors or odd lengths. For a size the standard panels do not cover, contact Odiz by email or use the virtual design assistant to request a custom build.
Any part that creates an ingoing nip point or rotates within reach, including belt-to-pulley nip points, chain and sprocket drives, take-ups and rollers. OSHA 1910.212(a)(1) requires guarding against these hazards, and OSHA 1910.219 requires sprocket wheels and chains to be enclosed unless they are more than 7 feet above the floor or platform.
No. The flat guards are designed for conveyors or general machine guarding, so the same bolt-together safety yellow panels can close off openings on other equipment. If the standard panels do not fit, Odiz can custom build the guard or feature you need.
Openings must keep hands and fingers from reaching the hazard at the distance the guard sits from it. The Machine Guarding Gotcha Stick gives a quick check: if the gauge can touch the equipment through any gap, the opening is too large and the guard needs to be changed.