Free shippingOn every online order shipped within the contiguous U.S. Valid only for orders placed through our website.
Safety Through Innovation · Made in the USA
Free shippingOn every online order shipped within the contiguous U.S. Valid only for orders placed through our website.
Horizontal boring mill chuck guards, magnetic Lexan shields and custom guarding for boring mills.
Showing all 3 products
On a horizontal boring mill the rotating chuck and spindle run at the operator’s working height, close to where people stand to set up, measure and watch the cut. The spindle extends toward the work as it feeds, large parts move with the table past fixed points on the machine, and the cut throws chips and coolant. Because the machine and its parts are large, a guard has to cover the rotating tooling without blocking the setups the mill was bought to run.
Pair the guards with emergency stop controls within reach of the operator’s station, and see CNC milling for machining center guarding.
OSHA 1910.212(a)(1) requires guarding against rotating parts and flying chips, and 1910.212(a)(3)(ii) calls for point of operation guarding that, absent a more specific standard, keeps every part of the operator’s body out of the danger zone during the operating cycle. Milling machines also appear on OSHA’s list of machines that usually need that kind of guarding. ANSI B11.8 covers manually controlled boring machines; for CNC boring mills, ANSI B11.23 applies only up to the axis-travel size set in its scope.
The Odiz horizontal boring mill chuck guard adjusts in height and width to cover the chuck, and the 24 in. guard adjusts in height on its supplied mount. If your chuck or setup falls outside that range, Odiz can assess the machine and build a custom guard for it.
A magnetic shield contains chips and coolant and can move from job to job, but it does not replace a guard on the rotating chuck or spindle. Use it alongside a chuck guard or custom guarding, and base the combination on a risk assessment of the setups you run.
Not always. ANSI B11.23 covers machining centers and automatic numerically controlled milling, drilling and boring machines, but only up to the axis-travel size set in its scope, and large CNC boring mills can exceed it. Check the scope before relying on it. Manually controlled boring mills fall under ANSI B11.8.