Free shippingOn every online order shipped within the contiguous U.S. Valid only for orders placed through our website.
Safety Through Innovation · Made in the USA
Free shippingOn every online order shipped within the contiguous U.S. Valid only for orders placed through our website.
Guarding for horizontal milling machines, including magnetic Lexan shields with handles and custom milling machine guards.
Showing all 2 products
A horizontal mill carries its cutters on an arbor that spans the table, so the rotating teeth are exposed across the width of the cut rather than at a single point. The side of the cutter turning into the work forms an in-running nip, chips and coolant are thrown off the cutter, and the power-fed table carries the part, vise and fixtures toward the arbor. Gang and straddle setups put several cutters on one arbor and widen the zone that needs guarding.
Arbor setups change from job to job, so guarding for a horizontal mill is built around the machine and the cutters you run. Odiz can assess the mill and install custom milling machine guards, with options for 2- and 3-axis mills and drawbar guarding. When specifying a guard, plan for:
OSHA 1910.212(a)(3)(iv)(e) names milling machines among the machines that usually require point of operation guarding, and the general requirements of 1910.212 also cover rotating parts and flying chips. ANSI B11.8 is the consensus standard for manually controlled milling machines, ANSI B11.23 covers machining centers and automatic numerically controlled milling machines, and ANSI B11.0 describes the risk assessment for choosing guards. Compare vertical milling machine and horizontal boring mill guarding.
Yes. OSHA 1910.212(a)(3)(iv)(e) lists milling machines among the machines that usually require point of operation guarding, and 1910.212(a)(1) requires protection from rotating parts and flying chips. On a horizontal mill that means guarding the arbor-mounted cutters and containing the chips and coolant they throw.
On a horizontal mill the cutters sit on an arbor that spans the table, so the exposed teeth run the width of the setup and change with every job, especially with gang or straddle cutters. The guard has to adjust to those setups, so Odiz builds horizontal mill guarding around the machine and the cutters you run.
Have the machine make and model, the table size and travel, the arbor and cutter setups you run, and photos of the work zone. Odiz can then assess the mill and install a custom guard designed around those setups, with interlocks where the guard has to open often.