Free shippingOn every online order shipped within the contiguous U.S. Valid only for orders placed through our website.
Safety Through Innovation · Made in the USA
Free shippingOn every online order shipped within the contiguous U.S. Valid only for orders placed through our website.
Vise stands and pedestals, including medium duty and leg vise stands, a Wilton 63185 equivalent pedestal and custom stands.
Showing all 6 products
Hammering, bending and twisting at a bench vise can shift a light bench, and a bench edge limits how far long parts can hang. A steel pedestal puts the vise where there is room to work around the job from every side, at a set height, on a base plate that bolts to the floor so the stand does not walk or tip under heavy blows.
If you mount a bench grinder on a heavy duty vise stand, machine rules apply: the grinder must be anchored under OSHA 1910.212(b), and its guards and work rests must be set to OSHA 1910.215. Dedicated grinder pedestals are in grinding and finishing stands, and stands for presses and quick changeovers are in machine stands. For standing work at the vise, see ergonomic mats.
No. It includes the pedestal and base only. It is built to fit Tradesman 1750, 1755, 1760 and 1765 series vises, with an 18 x 18 in. base, a 10-1/2 x 8-1/2 in. top plate and a 33-1/2 in. overall height, powder coated semi-gloss black.
A leg vise, also called a blacksmith's post vise, has a long leg that carries hammer blows down toward the floor. A leg vise stand gives that vise a steel base: the Odiz leg vise stand has a hole in its bottom plate to hold the leg, and the RII has a top plate flush with the column so the leg has clearance.
Sand inside the column deadens the ringing from hammer blows. The Leg Vise Stand RII offers an optional center tapped hole in the top plate so you can fill the square tube with sand. Sand is not included.
Yes, on several models. The leg vise stands offer an optional pre-drilled top plate to fit your vise, and build your own custom stand offers a pre-drilled top as an option. Otherwise the top plate comes blank so you can drill it to your vise's bolt pattern.