Free shippingOn every online order shipped within the contiguous U.S. Valid only for orders placed through our website.
Safety Through Innovation · Made in the USA
Free shippingOn every online order shipped within the contiguous U.S. Valid only for orders placed through our website.
Patented No Go™ bench grinder safety gauges in wire or magnet versions and the Odiz bench grinder adjustment safety kit.
Showing all 3 products
Each time a grinding wheel wears or is dressed, its diameter shrinks and two gaps open up: between the wheel and the work rest, and between the wheel and the adjustable tongue guard at the top of the wheel guard. A wide work rest gap lets the work jam between the rest and the wheel, which can break the wheel. OSHA 1910.215(a)(4) requires work rests to be kept adjusted closely to the wheel with a maximum opening of 1/8 in., and 1910.215(b)(9) limits the distance between the wheel and the tongue guard to 1/4 in.
The patented No Go™ bench grinder safety gauge has a 1/8 in. end for the work rest gap and a 1/4 in. end for the tongue guard gap. If an end slips into its gap, the gap is too wide and the grinder must be adjusted before use; if it does not fit, the setting is within the limit.
For a stand with work rest sensors, see the No Go Grinder Safety Stand in grinding and finishing stands. Replacement tool rests are in grinding and finishing parts, wheels in grinding wheels and grinders in bench grinders. All tool types are in safety tools and gauges.
OSHA 1910.215(a)(4) limits the opening between the wheel and the work rest to 1/8 in., and 1910.215(b)(9) limits the distance between the wheel and the adjustable tongue guard at the top of the guard to 1/4 in. Both gaps grow as the wheel wears, so they need regular checks and readjustment.
Both check the same two gaps. Choose the wire version where gauges tend to go missing, since it is permanently tethered to the grinder. Choose the magnet version to store the gauge on the machine while keeping it free to lift off, or get the adjustment safety kit, which includes a magnetic gauge with the adjustment tools.
Check them before the grinder is used and after every wheel change or dressing, because wheel wear opens both gaps. Stop the wheel first: OSHA 1910.215 does not allow work rest adjustment with the wheel in motion, and the rest must be clamped after each adjustment.
The kit includes magnetic tools for changing wheels and adjusting work rests and tongue guards, tethered so they stay at the grinder, and a patented magnetic No Go gauge for checking both gaps once the adjustment is done.