Free shippingOn every online order shipped within the contiguous U.S. Valid only for orders placed through our website.
Safety Through Innovation · Made in the USA
Free shippingOn every online order shipped within the contiguous U.S. Valid only for orders placed through our website.
Press safety tools such as custom fixed height die blocks and the Machine Guarding Gotcha Stick for OSHA 1910.217 checks.
Showing all 2 products
On a power press, hands and arms go between the dies during die setting and repair, and people work close to the point of operation when they check that a guard keeps fingers out. OSHA 1910.212(a)(3)(iv)(d) lists power presses among the machines that usually require point of operation guarding. Press safety tools support both of those tasks.
A die block, or safety block, sits between the upper and lower dies or between the slide and the bolster to keep the slide from closing while someone works in the die space. Odiz custom fixed height die blocks are engineered for your press tonnage and safety requirements, with heavy-duty welded handles for placing and removing the block, safety-yellow powder coating that is easy to see and optional interlock configurations. OSHA 1910.217 requires employers to provide and enforce the use of safety blocks whenever dies are being adjusted or repaired in a mechanical power press.
Under 1910.217, every point of operation guard on a mechanical power press must stop hands and fingers from reaching through, over, under or around it, with openings no larger than Table O-10 allows for the guard’s distance from the hazard. The Gotcha Stick checks guard openings: if it can touch the equipment through any gap, the opening is too large. Use it after a guard is installed or modified and during routine inspections.
See press safety controls, light curtains and presence-sensing devices, press guarding in presses and press brake, and energy isolation devices in lockout tagout. All tool types are in safety tools and gauges.
OSHA 1910.217(d)(9)(iv) requires employers to provide and enforce the use of safety blocks whenever dies are being adjusted or repaired in a mechanical power press. Blocks supplement lockout rather than replace it: isolate the press's energy sources and place the block before anyone works between the dies.
Start with the press tonnage, your safety requirements and the height the block must fill. Odiz engineers each block to those details, with heavy-duty welded handles, safety-yellow powder coating and optional interlock configurations.
With the machine stopped and locked out, try the gauge at every opening in the guard, including mesh, slots, edges and the gaps over and under panels. If it can touch the equipment through any gap, the guard does not keep hands and fingers out and must be corrected. The user is responsible for applying it to the standard that covers the machine.
No. 1910.217 covers mechanical power presses and excludes press brakes, hydraulic and pneumatic power presses and several other machine types. Those machines still fall under the general machine guarding rules of 1910.212, and ANSI B11.3 sets safety requirements for power press brakes.