Elevate safety and visibility at your lathe workstation with our fully custom, interlocked polycarbonate safety guard. Lightweight aluminum shields, robust steel legs, and smooth telescopic slides combine for effortless operation—while the bright yellow powder-coated finish ensures maximum visibility. Engineered for any height or width up to 117″, this on-site assembly guard protects operators without obstructing overhead crane handling or lathe access.
ODIZ can custom engineer and manufacture any belt guard based on 4 easy measurements.
See Image to match dimensions to option selection
Odiz will build to selected dimensions
– 2″ clearance on dimensions A B & D are recommended
– Dimensions C should be actual
If you are looking for assistance with Machine Stop Measurements and Safety Device Validation
Please contact us at Sales@odiz.com
VIDEO of High Speed Stop Measurement
Odiz Safety – Safety Through Innovation
The Odiz Safety Flat guards can be used for conveyors or general machine guarding purposes.
The guards are on 1 foot mounting increments so they can be bolted together for customization.
Please email sales@odiz.com or fill out the virtual design assistant for custom sizes.
This safety guard is a general-purpose ironworker safety guarding kit. This kit protects all four sides of the ironworker, including the shear, the punch, and the notcher.
Custom Motor–Pump Coupling Guards engineered for replacement or new machine designs. Built to your specifications and proudly made in the USA.
Expandable rear guarding system for press brakes. Electrically interlocked scissor-style design protects operators from rear-area hazards while allowing full access for maintenance. Customizable sizes and side wings available to suit your machine setup.
Toolroom Mill Chip and Coolant Shield for Back Corners designed to contain splash, overspray, and flying chips. Features a magnetic breakaway design for safety, dual handles for easy placement, and a durable safety-yellow powder coat. Made in the USA.
If you are looking for a custom radial arm drill with adjustable mounting features, contact us at sales@odiz.com
Made in the USA
If you need technical support in selecting features and design criteria, Odiz Safety has a General Design questionnaire that you can perform in 10-15 minutes from your phone at the machine. When you submit the report, it will be emailed to our sales and technical team to provide you with a robust recommendation, design and quotation. Simple click the Blue virtual assistant link below and follow the process:
If you need a custom buffer guard dust collection port, please contact us or use the form below.
If you need technical support in selecting features and design criteria, Odiz Safety has a General Design questionnaire that you can perform in 10-15 minutes from your phone at the machine. When you submit the report, it will be emailed to our sales and technical team to provide you with a robust recommendation, design and quotation. Simple click the link below and follow the process:
Odiz Safety General Machine Design Questionnaire LINK
Made in the USA!
Custom Lexan Magnetic Shield
For general particulate matter
Made in the USA!
If you are looking for a custom solution to your press needs, contact us at sales@odiz.com
Odiz works with many component OEMs to assess and provide the best solution for you press safety system.
Made in the USA!
If you need technical support in selecting features and design criteria, Odiz Safety has a General Design questionnaire that you can perform in 10-15 minutes from your phone at the machine. When you submit the report, it will be emailed to our sales and technical team to provide you with a robust recommendation, design and quotation. Simple click the link below and follow the process:
Odiz Safety Interlocked Adjustable Horizontal Bandsaw Guards
Made in the USA
ODIZ can custom engineer and manufacture any Barrier guards.
ODIZ is also a distributor for AGS barrier guard solutions, so we have the capabilities to combine multiple product offerings for your machine guarding desires.
If you need technical support in selecting features and design criteria, Odiz Safety has a General Design questionnaire that you can perform in 10-15 minutes from your phone at the machine. When you submit the report, it will be emailed to our sales and technical team to provide you with a robust recommendation, design and quotation. Simple click the link below and follow the process:
If you are looking for a custom guarding solution for your EDM machines, contact us at sales@odiz.com and our engineering team will design a solution for your operation.
MADE IN THE USA!
If you need technical support in selecting features and design criteria, Odiz Safety has a General Design questionnaire that you can perform in 10-15 minutes from your phone at the machine. When you submit the report, it will be emailed to our sales and technical team to provide you with a robust recommendation, design and quotation. Simple click the link below and follow the process:
Used to Retrofit older 3-roller bender machines with no safeties
Used to prevent getting close to the machine or emergency stop purposes
If you need enhanced safety system please contact us at www.odiz.com
If you need technical assistance about the application, feel free to try our virtual design assessment tool at the machine. It should only take 5 minutes to get us the information required to accurately quote you a solution:
Customize your guard to fit your mill table or operational needs
Can have interlock switches or safety enclosure
If you need technical support in selecting features and design criteria, Odiz Safety has a General Design questionnaire that you can perform in 10-15 minutes from your phone at the machine. When you submit the report, it will be emailed to our sales and technical team to provide you with a robust recommendation, design and quotation. Simple click the link below and follow the process:
Regarding Guard Tool Tight Fasteners:
Question: Does a guard that is held firmly in place without the use of screws or bolts, and cannot slide out of place, or be inadvertently jostled out of place, comply with the requirement in §1910.219(m) that guards on mechanical power transmission apparatus be securely fastened?
Response: Yes. The guards may be fastened by any secure method that prevents the guard from being inadvertently dislodged or removed, including, but not limited to, such means as screws, bolts, wing nuts and lock fasteners. OSHA would allow guards that could be easily removed to allow maintenance or repair activities in the most efficient manner, provided that the guard can be attached securely in place to protect employees once the maintenance or repair activities are completed.
If you need technical support in selecting features and design criteria, Odiz Safety has a General Design questionnaire that you can perform in 10-15 minutes from your phone at the machine. When you submit the report, it will be emailed to our sales and technical team to provide you with a robust recommendation, design and quotation. Simple click the link below and follow the process:
ODIZ can assess and install your lathe guards
If you need technical support in selecting features and design criteria, Odiz Safety has a LATHE design questionnaire that you can perform in 10-15 minutes from your phone. When you submit the report, it will be emailed to our sales and technical team to provide you with a robust design and quotation. Simple click the link below and follow the process:
Custom Machinery Enclosures designed for noise reduction, debris containment, coolant control, and improved operator safety. Built to fit your exact machine footprint and workflow requirements.
If you need technical support in selecting features and design criteria, Odiz Safety has a General Design questionnaire that you can perform in 10-15 minutes from your phone at the machine. When you submit the report, it will be emailed to our sales and technical team to provide you with a robust recommendation, design and quotation. Simple click the link below and follow the process:
ODIZ can assess and install your Milling Machines & Drill Press guards
If you need technical support in selecting features and design criteria, Odiz Safety has a General Design questionnaire that you can perform in 10-15 minutes from your phone at the machine. When you submit the report, it will be emailed to our sales and technical team to provide you with a robust recommendation, design and quotation. Simple click the link below and follow the process:
NO-GO™BENCH GRINDER WITH DUST COLLECTION INCLUDES/OPTIONS:
– ODIZ No-Go™ Technology
– Belt, Buffer or Bench Grinder
– Electrical Contractor Package
– Start/Stop/E-Stop
– Flexible face shields
– Lighting System
– Pre-Filter Merv 14
– HEPA Filters 99.97% 0.3 Micron
– Decibel Reduction Package
– Casters
– Magnehelic gage or Electronic sensing
– Engineered Shutoff on Tray
– Engineered Filter Change
– Integrated Self Cleaning Shaker/Vibrator
– Optional Bump Stop E-Stop
– WET SCRUBBER SYSTEM UPGRADE IS OPTIONAL (Titanium Alloys)
NO-GO TECHNOLOGY INCLUDES:
– Start/Stop/E-Stop
– LED for Overload Trip
– Electrical Contactor Package with Overload
– 120V Receptacle
If you need technical support in selecting features and design criteria, Odiz Safety has a General Design questionnaire that you can perform in 10-15 minutes from your phone at the machine. When you submit the report, it will be emailed to our sales and technical team to provide you with a robust recommendation, design and quotation. Simple click the link below and follow the process:
Odiz Safety General Machine Design Questionnaire LINK
ODIZ SAFETY LLC CAN Design and Build electro-mechanical Guarding for:
– Continuous Flow Lines
– Lathes/Mills
– CNC Equipment
– Infrastructure
– Old Non-Supported Equipment
If you need technical support in selecting features and design criteria, Odiz Safety has a General Design questionnaire that you can perform in 10-15 minutes from your phone at the machine. When you submit the report, it will be emailed to our sales and technical team to provide you with a robust recommendation, design and quotation. Simple click the link below and follow the process:
ODIZ SAFETY LLC CAN Design and Build:
– Assembly Benches
– Foot Rests
– Production Tools
– Ergonomic Solutions
If you need technical support in selecting features and design criteria, Odiz Safety has a General Design questionnaire that you can perform in 10-15 minutes from your phone at the machine. When you submit the report, it will be emailed to our sales and technical team to provide you with a robust recommendation, design and quotation. Simple click the link below and follow the process:
Custom Hydraulic Press Guard
Contact us or request a quote
MADE IN USA!!!
Send Completed Form to Sales@odiz.com
If you need technical support in selecting features and design criteria, Odiz Safety has a General Design questionnaire that you can perform in 10-15 minutes from your phone at the machine. When you submit the report, it will be emailed to our sales and technical team to provide you with a robust recommendation, design and quotation. Simple click the link below and follow the process:
To request a formal quote, add all the products you’re interested in to your cart. Then go to your cart page and click the “Request a Quote” button to fill out a short form and receive your detailed quote via email.
Example:
