Safety Through Innovation · Made in the USA

Baldor Buffer Dust Collection Guard Hood: steel, clamp-on, made for the model you own
Keep buffing dust and lint off your floor and away from your workers. Odiz Safety dust collection guard hoods are built from heavy-gauge steel for Baldor industrial buffers with 6″ to 14″ wheels. Each hood clamps onto the buffer’s motor housing with no drilling. It has a 4″ dust port that connects to your dust collector and neoprene rubber seals around the opening. A high-visibility yellow powder coat finishes the steel. Choose the hood for your Baldor model number below for a correct fit.
If you need a custom buffer guard dust collection port, please contact us or use the form below.
Made in the USA!
Options
Not sure where to start? Use our Virtual Design Assistant to assess your machine, or reach out to our team to learn more.
Generic buffer hoods leave gaps, rattle loose, or need homemade brackets. Odiz Safety hoods are designed around the actual size of each Baldor industrial buffer, including the wheel diameter, the shaft length, and the outside diameter of the motor housing where the hood mounts. The result is a hood that bolts on cleanly and surrounds the wheel properly.
A split steel clamp lined with 0.187"-thick neoprene rubber wraps around the buffer's motor housing. The rubber lining grips firmly, absorbs vibration, and protects the motor finish. Installation takes only hand tools, and you can remove the hood for wheel changes or maintenance.
A 4" round dust outlet sits at an angle on the bottom of the hood, directing debris down and away from the operator. It fits standard 4" dust collection hose and ductwork.
Neoprene rubber strips line the edges of the work opening. They protect parts and fingers from sharp steel edges and help keep the hood's suction pointed at the wheel.
The front opening is wide enough to present parts to the wheel comfortably, while the hood still covers the back and top of the wheel. That's where most compound, lint and fibers are thrown.
| Specification | Value |
|---|---|
| Fits | Baldor 1252, 12" industrial buffer |
| Wheel clearance | 14" diameter |
| Hood inside curve | 16.8" diameter |
| Overall height | 18.08" |
| Work opening width | 10" |
| Dust port | 4" diameter, angled outlet |
| Mounting | Split clamp, 5.25" inside diameter, lined with 0.187" neoprene (fits 5" motor housing) |
| Shell material | 11-gauge (0.12") steel |
| Side panel material | 14-gauge (0.075") steel |
| Seals | Neoprene rubber edge strips |
| Finish | Yellow powder coat |
| Weight | 20.1 lb |
If you need a custom buffer guard dust collection port, please contact us or use the form below.
Made in the USA!

Eliminate Risks of OSHA Fines & Injuries with a No-Go™ Dust Collectors NO-GO™Dust Collector OPTIONS: – ODIZ No…
Request quote
SKU ODIZ-1458

Custom Buffer Dust Collection Hood engineered to mount directly to your buffer machine for effective debris an…
$0.00 – $16,565.00
SKU ODIZ-8132

The Odiz No-Go™ Bench Grinder Downdraft Table combines the patented No-Go™ sensor control system with an air f…
$12,865.00 – $132,247.00
SKU ODIZ-1440

The ODIZ Safety Buffer End Caps for threaded shafts
$29.99 – $59.99
SKU ODIZ-2812