Remote Camera System for Hazardous Machining Tasks
Remote Camera System for Hazardous Machining Tasks lets machinists safely view setups, tool touch-offs, and finish verifications without entering the point of operation. Includes a waterproof camera with LED lighting, 16-foot cable, 11″ monitor, and mounting hardware.
Odiz Safety Interlocked Drill Press Mill Guard
All in one solution
Made in the USA!!!
VIDEO: Full video Overview, functional overview, functional tests, and conclusion
VIDEO: Demonstration of RESET Recognition option and guard feature overview
Ergonomic anti-fatigue mat designed for industrial machine shop environments. Provides operator comfort, reduces fatigue, and protects against slips and floor wear.
Odiz Adjustable height and width horizontal boring mill chuck guard:
Made in the USA
If you need technical support in selecting features and design criteria, Odiz Safety has a General Design questionnaire that you can perform in 10-15 minutes from your phone at the machine. When you submit the report, it will be emailed to our sales and technical team to provide you with a robust recommendation, design and quotation. Simple click the link below and follow the process:
Interlocked Front or Fully Enclosed Spindle Drill Press Guard designed to prevent operator contact with rotating spindles. Available in front-enclosure or full-enclosure configurations to meet your safety and compliance requirements.
If you are looking for a custom radial arm drill with adjustable mounting features, contact us at sales@odiz.com
Made in the USA
If you need technical support in selecting features and design criteria, Odiz Safety has a General Design questionnaire that you can perform in 10-15 minutes from your phone at the machine. When you submit the report, it will be emailed to our sales and technical team to provide you with a robust recommendation, design and quotation. Simple click the Blue virtual assistant link below and follow the process:
Polishing Lathe Drill Motor Safety System
Custom make your solution
MADE IN THE USA!
NO-GO TECHNOLOGY OPTIONS INCLUDES:
– Start/Stop/E-Stop
– No restart on power loss
– LED indicator for Guard Fault & Overload Trip
– Electrical Contactor Package
– Overload motor protection
– Guard with 24Vdc Interlock
– Power Supply
– Optional 120/240/480 systems
Custom Lexan Magnetic Shield
For general particulate matter
Made in the USA!
Odiz Safety is a distributor for Flexbar
Flexbar makes a economical Bridgeport Milling Guard for common uses
If you need a custom solution, please see our other custom guarding options.
Looking for an Anti-Restart Enclosure with a Start/Stop/Estop configuration?
Made in the USA!
Contact us at sales@odiz.com if you have any questions
Use this safety foot pedal to stop machinery such as lathes, milling machines, and other machines with your foot.
Optional Adjustable length: 32″-52″ OR 52″-90″ – For any custom sizes please contact us at sales@odiz.com
Spring-loaded mechanism with locking clasp
Machine or floor-mountable
Powder coated safety yellow and red for harsh conditions
Dual switch design for safety rated redundancy
MADE IN THE USA!
Regarding Guard Tool Tight Fasteners:
Question: Does a guard that is held firmly in place without the use of screws or bolts, and cannot slide out of place, or be inadvertently jostled out of place, comply with the requirement in §1910.219(m) that guards on mechanical power transmission apparatus be securely fastened?
Response: Yes. The guards may be fastened by any secure method that prevents the guard from being inadvertently dislodged or removed, including, but not limited to, such means as screws, bolts, wing nuts and lock fasteners. OSHA would allow guards that could be easily removed to allow maintenance or repair activities in the most efficient manner, provided that the guard can be attached securely in place to protect employees once the maintenance or repair activities are completed.
ODIZ can assess and install your Milling Machines & Drill Press guards
If you need technical support in selecting features and design criteria, Odiz Safety has a General Design questionnaire that you can perform in 10-15 minutes from your phone at the machine. When you submit the report, it will be emailed to our sales and technical team to provide you with a robust recommendation, design and quotation. Simple click the link below and follow the process:
NO-GO TECHNOLOGY INCLUDES:
– Start/Stop/E-Stop
– LED for Overload Trip
– Electrical Contactor Package with Overload
– 120V Receptacle
If you need technical support in selecting features and design criteria, Odiz Safety has a General Design questionnaire that you can perform in 10-15 minutes from your phone at the machine. When you submit the report, it will be emailed to our sales and technical team to provide you with a robust recommendation, design and quotation. Simple click the link below and follow the process:
The replacement task light will enhance working conditions.
To request a formal quote, add all the products you’re interested in to your cart. Then go to your cart page and click the “Request a Quote” button to fill out a short form and receive your detailed quote via email.
Example:
